Major tech MT775 Kullanım Kılavuzu - Sayfa 10

Ölçüm Cihazları Major tech MT775 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Major tech MT775 20 sayfaları. Ac/dc trms clamp meter
Ayrıca Major tech MT775 için: Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır

10. DC VOLTAGE MEASUREMENT

1. Set the function switch to

position. The meter automatically defaults to

DC Volts.

2. Insert the red test lead into the "V Ω TEMP HZ"

input terminal and the black lead to the "COM"

terminal.

3. Connect the other end of the test leads to the

circuit under test.

4. Read the display. If a "-" sign is displayed, the

red lead is the negative potential.

Note: • The meter is set to default to "Auto

Range" mode.

• Pressing the

allow the user to record the peak

maximum and minimum readings on the

AC volt range. See page 7 for further

instructions for "PEAK" Hold function.

_ _ _ _

hold button will

PEAK

Battery

range