Major tech MT1887 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Multímetro Major tech MT1887. Major tech MT1887 17 páginas. True rms industrial multimeter

DISPLAY BACKLIGHT

Press the HOLD/

the back light will flash a bright blue.

The backlight will automatically turn off after 10 seconds.

HOLD

The hold function freezes the reading in the display. Press the HOLD key momentarily to

activate or to exit the HOLD function.

PEAK HOLD

The Peak Hold function captures the peak AC or DC voltage or current. The meter can capture

negative or positive peaks as fast as 1 millisecond in duration. Momentarily press the PEAK

button, "PEAK" and "MAX" will display. The meter will update the dispay each time a higher

positive peak occurs. Press the PEAK button again, "MIN" will display. The meter will update

the dispay each time a lower negative peak occurs. Press and hold the PEAK button for more

than 1 second to exit PEAK Hold mode. Auto Power Off feature will be disabled automatically

in this mode.

With a fresh battery installed, the battery icon

lower right corner of the LCD. The lines will disappear as the battery is used. When the

appears alone in the display, the battery should be replaced.

The auto off feature will turn the meter off after 15 minutes. To disable the auto power off

feature, hold down the MODE button and turn the meter on. "APO d" will appear in the display.

Turn the meter off and then on again to re-enable the auto power off feature.

key for >1 second to turn the backlight on.

with four lines above it will be displayed in the

icon