Green Leaf PSE Workhorse ATV 2527 Montaje / Instrucciones de uso / Piezas - Página 5
Navegue en línea o descargue pdf Montaje / Instrucciones de uso / Piezas para Pulverizador de pintura Green Leaf PSE Workhorse ATV 2527. Green Leaf PSE Workhorse ATV 2527 8 páginas. 25 gallon deluxe atv sprayer - 7 nozzle
Imprimir páginaComplete Assembly
Insert Angle Brackets in
Mounting Brackets and
rotate Lever to lock
in place.
Custom ATV Tank Strap Installation Guide
The ratchet straps provided are specifically
design to attach a spot sprayer to the
rear rack of most common ATV's.
Please refer to the following
illustration for proper
mounting instructions.
CAUTION:
ALWAYS CHECK THE ATV LOAD
RATING BEFORE USING THE
SPRAYER. EXCESSIVE WEIGHT
MAY CAUSE YOUR ATV TO ROLL
OVER OR TIP ON UNSTABLE
SURFACES OR DURING
ACCELERATION. SERIOUS
INJURY COULD RESULT
FROM IMPROPER USE.
ALWAYS FOLLOW THE
ATV MANUFACTURERS
RECOMMENDATIONS.
Closed loop in
strap with Hook
#1 and D-Ring
Front ATV Rack Bar
Hook #1
Attach Boom Clamps to Boom
1. Lay ratchet strap over tank, per diagram
2. Attach Hook #1 to front ATV rack bar
3. Run loose tail of strap first thru the D-ring
then thru Hook #2 and back to the rachet.
(follow the arrows below)
4. Attach hook #2 to rear ATV rack bar
5. Tighten rachet to secure tank to ATV
D-Ring
Attach Boom Hose to valve
Install Hold Down straps in
locations shown. Refer to
illustration for strap lacing
instructions
in 7 locations
TANK-- END VIEW
Rear ATV Rack Bar
Tighten ratchet to
secure tank to ATV
Hook #2