Green Leaf PSE Workhorse ATV 2527 조립 / 작동 지침 / 부품 - 페이지 5

{카테고리_이름} Green Leaf PSE Workhorse ATV 2527에 대한 조립 / 작동 지침 / 부품을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Leaf PSE Workhorse ATV 2527 8 페이지. 25 gallon deluxe atv sprayer - 7 nozzle

페이지 인쇄

Complete Assembly

Insert Angle Brackets in

Mounting Brackets and

rotate Lever to lock

in place.

Custom ATV Tank Strap Installation Guide

The ratchet straps provided are specifically

design to attach a spot sprayer to the

rear rack of most common ATV's.

Please refer to the following

illustration for proper

mounting instructions.

CAUTION:

ALWAYS CHECK THE ATV LOAD

RATING BEFORE USING THE

SPRAYER. EXCESSIVE WEIGHT

MAY CAUSE YOUR ATV TO ROLL

OVER OR TIP ON UNSTABLE

SURFACES OR DURING

ACCELERATION. SERIOUS

INJURY COULD RESULT

FROM IMPROPER USE.

ALWAYS FOLLOW THE

ATV MANUFACTURERS

RECOMMENDATIONS.

Closed loop in

strap with Hook

#1 and D-Ring

Front ATV Rack Bar

Hook #1

Attach Boom Clamps to Boom

1. Lay ratchet strap over tank, per diagram

2. Attach Hook #1 to front ATV rack bar

3. Run loose tail of strap first thru the D-ring

then thru Hook #2 and back to the rachet.

(follow the arrows below)

4. Attach hook #2 to rear ATV rack bar

5. Tighten rachet to secure tank to ATV

D-Ring

Attach Boom Hose to valve

Install Hold Down straps in

locations shown. Refer to

illustration for strap lacing

instructions

in 7 locations

TANK-- END VIEW

Rear ATV Rack Bar

Tighten ratchet to

secure tank to ATV

Hook #2