KitchenAid KICU540BSS Manual de instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Placa de cocción KitchenAid KICU540BSS. KitchenAid KICU540BSS 12 páginas. Electric induction cooktop

Imprimir página

Gather the required parts before starting installation.

Parts Supplied

Mounting clips (4)

UL listed or CSA approved wire cable

Parts Needed

UL listed or CSA approved strain relief

UL listed wire connectors

UL approved junction box or 240V outlet

Check local codes. Check existing electrical supply. See

"Electrical Requirements."

It is recommended that all electrical connections be made by a

licensed, qualified electrical installer.

Location Requirements

Make sure you have everything needed for correct installation. It

is the responsibility of the installer to comply with the installation

clearances specified in these instructions.

IMPORTANT: Observe all governing codes and ordinances.

When installing cooktop, use minimum dimensions given.

To eliminate the risk of burns or fire by reaching over the

heated surface units, cabinet storage space located above

the surface units should be avoided. If cabinet storage is to

be provided, the risk can be reduced by installing a range

hood that projects horizontally a minimum of 5" (12.7 cm)

beyond the bottom of the cabinets.

It is the installer's responsibility to comply with installation

clearances specified on the model/serial/rating plate. The

model/serial/rating plate is located on the underside of the

cooktop burner box.

Cooktop Model/Serial/Rating Plate Location

A. Model/serial/rating plate location

INSTALLATION REQUIREMENTS

Parts

Check the cooktop base for an approved installation label.

Verify approved oven model numbers that can be installed

with your cooktop model number. If you do not find this label,

your cooktop may not be approved for use over an

undercounter built-in oven. Contact your dealer to confirm

that your cooktop is approved.

Ovens approved for this type of installation will have an

approval label located on the top of the oven. If you do not

find this label, contact your dealer to confirm that your oven is

approved. Refer to the oven manufacturer's Installation

Instructions for approval for built-in undercounter use and

proper cutout dimensions.

When installing the cooktop over an undercounter built-in

oven, do not fasten the cooktop to the countertop with

clamps or seal the cooktop to the countertop. This will make

the cooktop easier to remove if future servicing becomes

necessary.

Use the countertop opening dimensions that are given with

these Installation Instructions. Given dimensions are

minimum clearances and provide 0" (0 cm) clearance.

Grounded electrical supply is required. See "Electrical

Requirements" section.

Product Dimensions

Cooktop

A. 20" (51.0 cm)

B. 22

C. 2" (5.1 cm)

⁴⁄₅

" (58.0 cm)