Ganz zn-d9312nha Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Cámara de seguridad Ganz zn-d9312nha. Ganz zn-d9312nha 12 páginas. Zn-d9000 series network mini dome cameras
Imprimir página
Running cables on the exterior surface of the ceiling or
wall
To run cables on the exterior surface of the ceiling or wall, use the
following procedure to attach the camera body.
1
Remove the surface mount cover from the camera body.
2
Remove the section of the surface
mount cover indicated in the drawing
and then drill a hole through which the
cable is passed.
Bend and remove this area.
3
Attach the surface mount cover to the
camera body.
4
Remove the body cover.
5
Attach the camera body to the ceiling
or wall.
Pass the cable through the holes
you prepared in Step 2 above.
Please use fi xing screws suitable
for the material of the ceiling or wall
when attaching the camera body.
We recommend using screws with
4 mm diameter.
Hold the body cover and turn
the surface mount cover in a
counter-clockwise direction
until you hear a click.
Pass the cable through here.
EG-6
Embedding in the ceiling or wall
Be sure to use the adapter ring when embedding the unit in the
ceiling or wall.
1
Drilling holes in the ceiling or wall
Use the template included to mark out the position on the ceiling or
wall where you want to install the unit.
Use the template, drill two holes for screws (Screw B) used to attach the
adapter ring. Then, follow the perforations on the template and cut out a
hole to embed the camera body.
Attention
Double check to make sure that the sizes and positions of the holes are
appropriate BEFORE drilling the holes.
2
Attaching the adapter ring
Attach the adapter ring to the ceiling or wall to
which you want to attach the camera body.
Please use fi xing screws suitable for the mate-
rial of the ceiling or wall when attaching the
camera body. We recommend using screws
with 4 mm diameter.
3
Connecting the cables
For details of the cable connection, refer to "Connecting the cables"
(page EG-8).
4
Attaching the camera body
1
Remove the surface mount cover from
the camera body.
2
Remove the body cover.