HIKVISION TURBO HD DS-2CE56H0T-ITMF Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION TURBO HD DS-2CE56H0T-ITMF. HIKVISION TURBO HD DS-2CE56H0T-ITMF 16 páginas. Turbo hd bullet & dome camera
También para HIKVISION TURBO HD DS-2CE56H0T-ITMF: Manual del usuario (17 páginas)
Imprimir página
Steps:
1.
Drill four screw holes in the wall according to the
holes of the mount.
2. Install the mount to the wall by aligning the four
screw holes of the mount with expansion screws on
the wall.
3. Secure the mount with four hex nuts and washers.
4. Install the mounting base of the turret camera to
the wall mounting bracket, and secure them with
supplied screws.
Figure 2-18 Install the Mounting Base to the Bracket
5. Route the cables through the mount.
6. Repeat steps 7 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
2.4 Ceiling Mounting of Type III Camera
Steps:
1. Disassemble the turret camera by rotating the
camera to align the notch to one of the marks, as
shown in the figure below.
Figure 2-19 Disassemble the Camera
2. Remove the mounting base from the camera body
with a flat object, e.g., a coin.
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. Drill the screw holes and the cable hole (optional)
on the ceiling/wall according to the drill template.
Figure 2-17 Install the Mount
60 mm (2.36" )
Figure 2-20 Drill Template