HIKVISION TURBO HD DS-2CE56H0T-ITMF Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION TURBO HD DS-2CE56H0T-ITMF. HIKVISION TURBO HD DS-2CE56H0T-ITMF 16 páginas. Turbo hd bullet & dome camera
También para HIKVISION TURBO HD DS-2CE56H0T-ITMF: Manual del usuario (17 páginas)
Imprimir página
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable
5. Attach the mounting base to the ceiling/wall, and
secure them with supplied screws.
Figure 2-21 Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden wall/ceiling,
self-tapping screws are required.
6. Route the cables through the cable hole, or the side
opening.
7. Align the camera with the mounting base, and
tighten the camera on the mounting base.
Figure 2-22 Secure the Camera with Mounting Base
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Tilt Position
[0°to 75°]
1). Hold the camera body, and rotate the enclosure
to adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
3 Menu Description
Purpose:
Call the menu by clicking the button
Control interface, or call preset No.95.
.
Pan Position
[0° to 360°]
Figure 2-23 3-axis Adjustment
Rotation Position
[0°to 360°]
on the PTZ