Ganz PixelPro GXi Series Manual de instalación - Página 10
Navegue en línea o descargue pdf Manual de instalación para Media Converter Ganz PixelPro GXi Series. Ganz PixelPro GXi Series 18 páginas. H.264 video encoder
Imprimir páginaPixelPro GXi Series
4.2.Inserting and ejecting a blade
Inserting a blade
4.2.1. Inserting a blade
*Remove a cover plate from the slot in which a blade will be mounted. This is done by
unfastening the screws with a screw driver on each side of the cover.
1. Insert the blade into the rack chassis. Make sure the blade is properly aligned with the
rail.
2. Push back the blade completely.
3. Tighten the screws by turning them clockwise.
4.2.2. Ejecting a blade
1. Unlock the two screws on both sides of the blade.
2. Grasp the blade and pull it out as shown in the above image
3. Remove the blade from the rack chassis.
10-2013-A
Lock
Unlock
Lock
Unlock
Ejecting a blade
ZS1-4DB1 Installation Guide
10