Ganz PixelPro GXi Series Installation Manual - Page 10

Browse online or download pdf Installation Manual for Media Converter Ganz PixelPro GXi Series. Ganz PixelPro GXi Series 18 pages. H.264 video encoder

Print Page

PixelPro GXi Series

4.2.Inserting and ejecting a blade

Inserting a blade

4.2.1. Inserting a blade

*Remove a cover plate from the slot in which a blade will be mounted. This is done by

unfastening the screws with a screw driver on each side of the cover.

1. Insert the blade into the rack chassis. Make sure the blade is properly aligned with the

rail.

2. Push back the blade completely.

3. Tighten the screws by turning them clockwise.

4.2.2. Ejecting a blade

1. Unlock the two screws on both sides of the blade.

2. Grasp the blade and pull it out as shown in the above image

3. Remove the blade from the rack chassis.

10-2013-A

Lock

Unlock

Lock

Unlock

Ejecting a blade

ZS1-4DB1 Installation Guide