KitchenAid KUDD01DPPA0 Manual de instrucciones de instalación - Página 11
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Lavavajillas KitchenAid KUDD01DPPA0. KitchenAid KUDD01DPPA0 16 páginas. Drawer dishwasher
Imprimir página
5. Attach thedrainhose connector totheairbreak using
thesupplied h ose clamp,
EJ_
air break
E
drain hose
connector
waste
water supply
8" (20.3 cm) min. bend
radius from valve
2,
install the flat seal washer on the end of the inlet hose.
Connect the inlet hose to the water supply valve. Tighten
securely.
Turn the water valve on and check for any leaks.
va,ve0
f,atsea,
3, Open top drawer. Remove the packing tape from the front
and rear of dish rack.
4, Close drawer.
5, Open bottom drawer. Remove the packing tape from the front
and rear of dish rack.
6, Close drawer.
1.
Remove
front
panels
from
box
and discard
all shipping
material.
2.
On the shorter
front
panel
(lower
drawer),
remove
the
tape
securing
the connector
and wires.
Discard
tape.
3.
Connect
the end of the medallion
connector
to the
connector
from
the lower
drawer.
wire
opening
end of medallion
connector
lower front
panel
4,
5,
Gently feed the wires and connectors
into the metal plate
wire opening.
Line up front panel tabs to slots in metal plate, Do not
puii the connector
from wire opening,
slots _
"- front panel
._.__....
_'_m
ata, plat e
\_
6.
Push the front
panel
down
to lock in place.
7.
Repeat
steps
2-6 for the top drawer
panel.
8.
When
installed
properly,
top
panel
should
be even
with
top of dishwasher
with
a 3/8" (9.5 ram)
gap between
the
top and bottom
panel
11