Avantco 178MC58HC Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Electrodomésticos de cocina Avantco 178MC58HC. Avantco 178MC58HC 9 páginas. School milk cooler
También para Avantco 178MC58HC: Manual del usuario (9 páginas)
Imprimir página
Safety
This unit is intended for use in a temperature-controlled environment less than 75 degrees
Fahrenheit and 60% relative humidity. Malfunction due to improper conditions is not covered
under warranty.
IMPORTANT –
Please Read Before Installation:
•
If the unit has recently been transported on its side, please let the unit stand upright for a minimum
of 24 hours before plugging it in.
•
Make sure that the unit has reached the desired temperature before loading the unit with products.
This unit is meant for keeping cold products cold, not chilling warm products.
•
Make sure that there is proper ventilation around the unit in the area where it will operate.
•
Make sure all accessories are installed (i.e., shelves, shelf clips, casters) before plugging the unit in.
•
Do not attempt to remove or repair any component of the unit. Consult an authorized service
technician for servicing/repair.
•
Do not sit/stand inside the unit.
•
Please read through the manual in its entirety.
•
This unit is designed to perform in a temperature-controlled environment at 60% relative humidity.
The unit should be located away from doors, air ducts, and fans that could disrupt airflow and
negatively impact performance.
Cabinet Location Guidelines
•
Install the unit on strong and leveled surfaces.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
•
Install the unit in an indoor, well-ventilated area.
- For best performance, please maintain clearance of 4" on the back of the unit.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
•
Avoid installation in a high humidity and/or dusty area.
- Humidity above 60% can cause the unit to rust, collect condensation, and may decrease efficiency.
- Dust collected on the condenser coil will cause the unit to malfunction.
- Malfunctions due to temperatures above 75 degrees Fahrenheit, humidity above 60%,
or improperly maintained condenser coil will void the warranty.
•
Select a location away from heat and moisture-generating equipment.
- Ambient temperatures above 75 degrees Fahrenheit may cause the compressor to malfunction.
- The unit should not be used in areas over 90 degrees Fahrenheit.
- Malfunctions due to ambient temperatures above 75 degrees Fahrenheit will void the warranty.
- Do not install the unit inside a closet or alcove
www.AvantcoRefrigeration.com
4
User Manual
Commercial School Milk Coolers