Makita 3901 Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 3901. Makita 3901 17 páginas. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
También para Makita 3901: Folleto (1 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (12 páginas)

Imprimir página

1. For Frame Joint

1. For Edge-To-Edge Joint

For Frame Joint and Edge-To-Edge Joint only

004597

Clamp the other workpiece to the workbench.

004598

10. For Corner Joint only

004599

Place the tool on the workpiece so that the blade is facing down.

For T-Butt Joint only

004600

Remove the angle guide from the tool. Place the tool on the workpiece

so that the blade is facing down.

11. Repeat the steps 6 - 8 to cut the slots in the horizontal or the other work-

piece.

If you do not need to center the blade in the board thickness, proceed as fol-

lows:

For Corner Joint, Miter Joint, Frame Joint and Edge-To-Edge Joint only

004601

•

Remove the angle guide from the tool. Set the fence at 90° for Corner

Joint, Frame Joint and Edge-To-Edge Joint or at 45° for Miter Joint.

•

Follow steps 1 - 11 excluding steps 5 and 10 described above.