Makita 3901 사용 설명서 - 페이지 12

{카테고리_이름} Makita 3901에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3901 17 페이지. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Makita 3901에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 사용 설명서 (16 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

1. For Frame Joint

1. For Edge-To-Edge Joint

For Frame Joint and Edge-To-Edge Joint only

004597

Clamp the other workpiece to the workbench.

004598

10. For Corner Joint only

004599

Place the tool on the workpiece so that the blade is facing down.

For T-Butt Joint only

004600

Remove the angle guide from the tool. Place the tool on the workpiece

so that the blade is facing down.

11. Repeat the steps 6 - 8 to cut the slots in the horizontal or the other work-

piece.

If you do not need to center the blade in the board thickness, proceed as fol-

lows:

For Corner Joint, Miter Joint, Frame Joint and Edge-To-Edge Joint only

004601

•

Remove the angle guide from the tool. Set the fence at 90° for Corner

Joint, Frame Joint and Edge-To-Edge Joint or at 45° for Miter Joint.

•

Follow steps 1 - 11 excluding steps 5 and 10 described above.