CORNING MRU Montaje Manual de instalación - Página 2

Navegue en línea o descargue pdf Montaje Manual de instalación para Instrumentos de medida CORNING MRU. CORNING MRU 12 páginas. Mid-power remote unit outdoor enclosure mimo

Imprimir página

ADDITIONAL REQUIRED ITEMS (NOT SUPPLIED)

• Standard electrician tools (including ratchet wrench with extension bar and 8 mm socket) for tightening self-drilling

screws securing MRU chassis to cabinet rails

• Assorted cable ties

• 90-degree right-angle 4.3-10 type male connector coax cables – one for antenna connection and one for external

2.5 GHz RF source connection (if relevant)

• Sealing material for knockouts – if not using conduits

• Recommended – Flexible cable conduits for routing connection cables through cabinet knockouts; refer to

Figure 2 for relevant knockouts. Following are recommended Heyco® part numbers for flexible liquid-tight conduits

(or the equivalent):

Manufacturer Part Number

8406

8453

8456

8642

Table 2. Recommended Conduits

• Recommended DIN rail power supply for MRU AC models — MEAN WELL SDR-480-48 or equivalent;

Input: 100-240 V AC; 5 A 50/60 Hz; Output: 48 V; 10 A

• DIN rail TS-35 / 7.5 or 15 — used for mounting DIN rail power supply onto air tray

• Rail/profile cutter

• Two screws for securing DIN rail to cabinet air tray

• Slotted 4 mm screwdriver — for SDR wiring

Corning Optical Communications

Description

Heyco-Flex™ Liquid-Tight Conduit Fittings, HFC 1 Black with 8467 Nut,

conduit fitting 1-in thread

Heyco-Flex Liquid-Tight Tubing, HF2 1 tubing 100 ft coil, black

Heyco-Flex II Liquid-Tight Tubing, HF2 2 tubing 50 ft coil Black

Heyco-Flex Liquid-Tight Conduit Fittings, HFC 2 black; conduit fitting 2-in thread

Quick Installation Sheet | CMA-595-AEN | Page 2