Makita 5143R Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 5143R. Makita 5143R 13 páginas. Circular saw
También para Makita 5143R: Manual de instrucciones (13 páginas), Manual de instrucciones (13 páginas), Manual de instrucciones (13 páginas), Manual de instrucciones (12 páginas), Manual de instrucciones (16 páginas)

Imprimir página

CAUTION:

•

The riving knife should always be used except

when plunging in the middle of the workpiece.

Rip fence (Guide rule)

The handy rip fence allows you to do extra-accurate

straight cuts. Simply slide the rip fence up snugly

against the side of the workpiece and secure it in

position with the screw on the front of the base. It also

makes repeated cuts of uniform width possible.

MAINTENANCE

CAUTION:

•

Always be sure that the tool is switched off and unplugged

before attempting to perform inspection or maintenance.

Clean out the guard to ensure there is no accumu-

•

lated sawdust and chips which may impede the

operation of the guarding system. A dirty guarding

system may limit the proper operation which could

result in serious personal injury. The most effective

way to accomplish this cleaning is with compressed air.

If the dust is being blown out of the guard, be sure

the proper eye and breathing protection is used.

•

Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

Replacing carbon brushes

► 1 . Limit mark

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps.

Take out the worn carbon brushes, insert the new ones

and secure the brush holder caps.

► 1 . Screwdriver 2. Brush holder cap

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL

ACCESSORIES

•

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

•

NOTE:

•

10 ENGLISH

CAUTION:

These accessories or attachments are recom-

mended for use with your Makita tool specified

in this manual. The use of any other accessories

or attachments might present a risk of injury to

persons. Only use accessory or attachment for

its stated purpose.

Saw blades

Rip fence (Guide rule)

Hex wrench

Joint

Some items in the list may be included in the

tool package as standard accessories. They

may differ from country to country.