Avantes FOS-2-INL Manual de funcionamiento e instalación - Página 4
Navegue en línea o descargue pdf Manual de funcionamiento e instalación para Interruptor Avantes FOS-2-INL. Avantes FOS-2-INL 11 páginas.
Imprimir página
The following interface cables are available to connect any Avantes AvaSpec-USB2/EVO platform to
FOS-2-INL for the FOS-2-INL:
IC-DB26-FOS-SHUTTER-0.6
IC-DB26-FOS-SHUTTER-2
Pin description of an interface cable connector
Pin
Description
1
Channel 2: Shutter Open/Close (High = Open, Low = Close)
2
GND
3
Channel 1: Shutter Open/Close (High = Open, Low = Close)
4
GND
Pin 1 is connected to DO5 of the DB26 connector.
Pin 3 is connected to DO8 of the DB26 connector.
2.3 Parts included
Fiber-optic Switch FOS-2-INL
2.4 Parts not included
1. Interface cable IC-DB26-FOS-SHUTTER-0.6 (or IC-DB26-FOS-SHUTTER-2)
2. Power supply PS-12V/2.08A
These parts can be ordered separately at Avantes.
2.5 Starting up
1. Plug in the PS-12V/2.08A power supply .
2. Plug in the connector of the power supply into the socket of the FOS-2-INL.
3. Connect the SMA-connectors of your fibers to the Fiber inputs Channel 1 and 2
4. For automatic TTL-shutter control connect interface cable IC-DB26-FOS-SHUTTER-0.6 (or IC-
DB26-FOS-SHUTTER-2) plug in connector and connect to AvaSpec spectrometer
5. Connect the connector of the IC-DB26-FOS-SHUTTER-0.6 (or IC-DB26-FOS-SHUTTER-2) into
the unit and lock the connector with the screw terminal.
6. For Correct for long time drift with FOS-2-INL see application note AvaSoft 8.
Revision: 1-00
© Avantes BV
Length = 0.6m
Length = 2.0m
www.avantes.com
3