Avantes FOS-2-INL Kullanım ve Kurulum Kılavuzu - Sayfa 4

Anahtar Avantes FOS-2-INL için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. Avantes FOS-2-INL 11 sayfaları.

Sayfayı Yazdır
Avantes FOS-2-INL Kullanım ve Kurulum Kılavuzu
The following interface cables are available to connect any Avantes AvaSpec-USB2/EVO platform to
FOS-2-INL for the FOS-2-INL:
IC-DB26-FOS-SHUTTER-0.6
IC-DB26-FOS-SHUTTER-2
Pin description of an interface cable connector
Pin
Description
1
Channel 2: Shutter Open/Close (High = Open, Low = Close)
2
GND
3
Channel 1: Shutter Open/Close (High = Open, Low = Close)
4
GND
Pin 1 is connected to DO5 of the DB26 connector.
Pin 3 is connected to DO8 of the DB26 connector.

2.3 Parts included

Fiber-optic Switch FOS-2-INL

2.4 Parts not included

1. Interface cable IC-DB26-FOS-SHUTTER-0.6 (or IC-DB26-FOS-SHUTTER-2)
2. Power supply PS-12V/2.08A
These parts can be ordered separately at Avantes.

2.5 Starting up

1. Plug in the PS-12V/2.08A power supply .
2. Plug in the connector of the power supply into the socket of the FOS-2-INL.
3. Connect the SMA-connectors of your fibers to the Fiber inputs Channel 1 and 2
4. For automatic TTL-shutter control connect interface cable IC-DB26-FOS-SHUTTER-0.6 (or IC-
DB26-FOS-SHUTTER-2) plug in connector and connect to AvaSpec spectrometer
5. Connect the connector of the IC-DB26-FOS-SHUTTER-0.6 (or IC-DB26-FOS-SHUTTER-2) into
the unit and lock the connector with the screw terminal.
6. For Correct for long time drift with FOS-2-INL see application note AvaSoft 8.
Revision: 1-00
© Avantes BV
Length = 0.6m
Length = 2.0m
www.avantes.com
3