Avantgarde DUO GT Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Altavoces Avantgarde DUO GT. Avantgarde DUO GT 19 páginas.

Imprimir página
Avantgarde DUO GT Manual del usuario
HEIGHT ADJUSTMENT OF FEET
UNO SD, DUO SD & DUO GT
The loudspeaker stands on 4 x rotatable base frame arms �. On de‐
livery, standard feet with Teflon glides � are installed.
3
1
After the final installation of the speaker, adjust the height of the
feet by turning the handle � clockwise to level the speaker.
2
1
OPTIONAL SPIKE
UNO SD, DUO SD & DUO GT
Alternatively, the optional spikes � can be installed instead of the
standard feet �. For this work, we strongly recommend the assi‐
3
stance of a second person!
1
4
One person carefully tilts the speaker backwards. The front two feet
1
5
will float in the air.
2
1
The second person can now unscrew the standard feet � by turning
2
1 6
them counterclockwise using the tool �.
1 7
3
If desired, screw in the lock nuts � using the tool � to fix the height
adjustment of the spikes.
4
Screw in the spikes � clockwise with the help of the tool. If necessa‐
ry, use the protective washers � to protect sensitive floors from da‐
mage.
5
After mounting the front spikes �, now carefully tilt the speaker for‐
ward and replace the rear feet accordingly.
6
After the speaker is finally set up, adjust the height by turning the
handle � clockwise to level the speaker.
7
Firmly tighten the lock nuts � to fix the height adjustment.
ANGLE ADJUSTMENT OF FEET
UNO SD, DUO SD & DUO GT
On delivery, the 4 x rotatable base frame arms � are mounted on
the loudspeaker at a 45 degree angle.
1
The angle of the arms � can be adjusted in 7.5 degree steps by the
precision Hirth toothing. For this work, we strongly recommend the
assistance of a second person!
One person carefully tilts the speaker backwards. The front two feet
1
1
will then float in the air.
The second person can now loosen the mounting screw � of the
2
Hirth gear and turn the base frame arms � to the desired position.
8
1 2
3
Tighten the mounting screw � again.
After adjusting the angle of the front foot stand booms, now care‐
4
fully tilt the speaker forward and adjust the rear base frame arms �
accordingly.
12
13