Makita BCG180 Información técnica - Página 8

Navegue en línea o descargue pdf Información técnica para Herramienta eléctrica Makita BCG180. Makita BCG180 11 páginas. Cordless caulking gun
También para Makita BCG180: Manual de instrucciones (12 páginas)

Imprimir página

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Motor Complete, Gear Assembly (cont.)

ASSEMBLING

(8) Assemble the driving section (Gear assembly and Motor complete) to Housing (L) complete as drawn in Fig. 11.

Fig. 11

1. Mount Compression spring 6 to Magnet

in Gear housing.

Magnet

3. Gear assembly is pushed by Compression spring 6

toward Sub controller, and it may not be fitted

within the rib on Housing (L) complete at the motor

portion. So, push Gear assembly toward the direction

of the black arrow shown below to set it within the rib.

Rib

Sub controller

(9) When replacing the whole Gear assembly, use new Gear assembly as drawn in Fig. 12.

Fig. 12

1. Remove three 3x16 Tapping screws and Gear housing cover from Gear assembly.

2. Assemble Motor complete with Gear housing cover to new Gear assembly

with three 3x16 Tapping screws.

Note: Scrap Removed Gear housing cover and three 3x16 Tapping screws.

Gear housing cover

(the component of Motor complete)

Main body of

Gear assembly

Compression spring 6

2. Fit Compression spring 6 to the rib on

Housing (L) complete with pressing

it toward Magnet.

Magnet

4. Make sure that Compression spring 6

fits inside the space.

3x16 Tapping screw (3 pcs.)

Motor complete

P 8/ 11

Compression spring 6

Rib

Compression

spring 6