Makita BCG180 기술 정보 - 페이지 8

{카테고리_이름} Makita BCG180에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BCG180 11 페이지. Cordless caulking gun
Makita BCG180에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Motor Complete, Gear Assembly (cont.)

ASSEMBLING

(8) Assemble the driving section (Gear assembly and Motor complete) to Housing (L) complete as drawn in Fig. 11.

Fig. 11

1. Mount Compression spring 6 to Magnet

in Gear housing.

Magnet

3. Gear assembly is pushed by Compression spring 6

toward Sub controller, and it may not be fitted

within the rib on Housing (L) complete at the motor

portion. So, push Gear assembly toward the direction

of the black arrow shown below to set it within the rib.

Rib

Sub controller

(9) When replacing the whole Gear assembly, use new Gear assembly as drawn in Fig. 12.

Fig. 12

1. Remove three 3x16 Tapping screws and Gear housing cover from Gear assembly.

2. Assemble Motor complete with Gear housing cover to new Gear assembly

with three 3x16 Tapping screws.

Note: Scrap Removed Gear housing cover and three 3x16 Tapping screws.

Gear housing cover

(the component of Motor complete)

Main body of

Gear assembly

Compression spring 6

2. Fit Compression spring 6 to the rib on

Housing (L) complete with pressing

it toward Magnet.

Magnet

4. Make sure that Compression spring 6

fits inside the space.

3x16 Tapping screw (3 pcs.)

Motor complete

P 8/ 11

Compression spring 6

Rib

Compression

spring 6