Jandy LEGACY LRZE Manual rápido - Página 2
Navegue en línea o descargue pdf Manual rápido para Control Panel Jandy LEGACY LRZE. Jandy LEGACY LRZE 2 páginas.
![Jandy LEGACY LRZE Manual rápido](/uploads/products/server2/2128056/2128056.jpg)
AquaLink
RS/Remote Enable
®
Remote system must be wired as shown below
before enabling the remote's options on the
controller. Enter REMOTE THERMOSTAT in
SERVICE setup Mode.
• Display will show REMOTE on the second line.
The up/down arrows will toggle to options:
'OFF', 'HI-LO-COM', or 'REMOTE T-STAT'.
• For Aqualink RS connection use 'REMOTE
T-STAT' then MENU to save selection.
• Select SPA. Raise heating setpoint, using up
arrow key, to maximum (104°F).
• Control will indicate HEATER in SPA HEAT
mode and will alternately fl ash REMOTE
T-STAT ENABLED.
USA: 1.800.822.7933 • www.jandy.com • [email protected] • ©2009 Zodiac Pool Systems, Inc. All rights reserved.
LEGACY
LRZE CONTROL QUICK GUIDE
™
Step 1:
With the control set to OFF, press MENU,
followed by POOL and SPA, holding all three
buttons simultaneously for 7 to 10 seconds to
switch to the hidden menu.
Step 2:
When REMOTE is displayed,
press the MENU button.
Step 3:
Press either the up or down arrow to
change the display to HI-LO-COM (3 wire)
or T-STAT (2 wire connection).
Pumps • Filters • Heaters • Heat Pumps • Controls • Lights
Water Purifi cation • Valves • Water Features • Water Leveling
Cleaners • In-Floor • Pool Covers • Accessories
EXAMPLE OF SET-UP FOR RS CONTROLS
Step 4:
Press MENU to select.
Step 5:
Press POOL or SPA to return to
the normal screen.
ALL JANDY PRODUCTS WORK
SEAMLESSLY TOGETHER
Jandy Control Systems
manage our complete line of
technologically-advanced products.
technologically-advanced products.
H0578600_