Jandy LEGACY LRZE Manuale rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale rapido per Pannello di controllo Jandy LEGACY LRZE. Jandy LEGACY LRZE 2.

AquaLink

RS/Remote Enable

Remote system must be wired as shown below

before enabling the remote's options on the

controller. Enter REMOTE THERMOSTAT in

SERVICE setup Mode.

• Display will show REMOTE on the second line.

The up/down arrows will toggle to options:

'OFF', 'HI-LO-COM', or 'REMOTE T-STAT'.

• For Aqualink RS connection use 'REMOTE

T-STAT' then MENU to save selection.

• Select SPA. Raise heating setpoint, using up

arrow key, to maximum (104°F).

• Control will indicate HEATER in SPA HEAT

mode and will alternately ﬂ ash REMOTE

T-STAT ENABLED.

LEGACY

LRZE CONTROL QUICK GUIDE

™

Step 1:

With the control set to OFF, press MENU,

followed by POOL and SPA, holding all three

buttons simultaneously for 7 to 10 seconds to

switch to the hidden menu.

Step 2:

When REMOTE is displayed,

press the MENU button.

Step 3:

Press either the up or down arrow to

change the display to HI-LO-COM (3 wire)

or T-STAT (2 wire connection).

Pumps • Filters • Heaters • Heat Pumps • Controls • Lights

Water Puriﬁ cation • Valves • Water Features • Water Leveling

Cleaners • In-Floor • Pool Covers • Accessories

EXAMPLE OF SET-UP FOR RS CONTROLS

Step 4:

Press MENU to select.

Step 5:

Press POOL or SPA to return to

the normal screen.

ALL JANDY PRODUCTS WORK

SEAMLESSLY TOGETHER

Jandy Control Systems

manage our complete line of

technologically-advanced products.

H0578600_