Avaya 9610 Manual del usuario final - Página 4
Navegue en línea o descargue pdf Manual del usuario final para Teléfono IP Avaya 9610. Avaya 9610 7 páginas. One-x deskphone edition
También para Avaya 9610: Manual de consulta rápida (4 páginas), Referencia rápida (1 páginas)
Imprimir página
Conventions Used in the Procedure Descriptions
Feature and Feature xxxxx
LWC CnLWC AutCB Timer
{handset tones}
Special Instructions
Use the following special instructions for operating your telephone.
•
The first time you use these procedures, you will need to customize them for yourself by obtaining the relevant
information from your system manager.
•
To operate a feature, you must have the handset off-hook or the speaker or speakerphone on unless otherwise noted.
•
If you receive anintercept tone (high-pitched, alternating high and low tone) while attempting to operate any feature,
you have taken too much time to complete a procedural step or have made a dialing error. Hang up, get dial tone, and
return to Step 1.
Make a Call
Provides procedures for making a call.
To make a call:
1. Lift the handset.
2. Dial the number you want to call.
The call is placed.
o
To call a person from the Contacts list:
1. Press Contacts.
2. Select the person or number you want to call.
3. Lift the handset.
4. Press Call or OK.
The call is placed.
o
Conventions
Each of these represents a button that has a feature assigned to it. The
button is labeled with the feature name, sometimes followed by an
extension number (shown as xxxxx ) or a person's name.
Information that is offset represents the display screen. The second
line appearing on the display will most likely list the features you can
access with the softkeys.
The tone that appears in curly quotes after a step, such as {dial tone},
indicates what you should hear from your handset (or speakerphone)
after successfully performing that step.
Feature Finder
Make a Call
9610 IP Telephone End User Guide | 4 |
P a g e