Avaya 9610 최종 사용자 설명서 - 페이지 4
{카테고리_이름} Avaya 9610에 대한 최종 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 9610 7 페이지. One-x deskphone edition
Avaya 9610에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (4 페이지), 빠른 참조 (1 페이지)
페이지 인쇄
Conventions Used in the Procedure Descriptions
Feature and Feature xxxxx
LWC CnLWC AutCB Timer
{handset tones}
Special Instructions
Use the following special instructions for operating your telephone.
•
The first time you use these procedures, you will need to customize them for yourself by obtaining the relevant
information from your system manager.
•
To operate a feature, you must have the handset off-hook or the speaker or speakerphone on unless otherwise noted.
•
If you receive anintercept tone (high-pitched, alternating high and low tone) while attempting to operate any feature,
you have taken too much time to complete a procedural step or have made a dialing error. Hang up, get dial tone, and
return to Step 1.
Make a Call
Provides procedures for making a call.
To make a call:
1. Lift the handset.
2. Dial the number you want to call.
The call is placed.
o
To call a person from the Contacts list:
1. Press Contacts.
2. Select the person or number you want to call.
3. Lift the handset.
4. Press Call or OK.
The call is placed.
o
Conventions
Each of these represents a button that has a feature assigned to it. The
button is labeled with the feature name, sometimes followed by an
extension number (shown as xxxxx ) or a person's name.
Information that is offset represents the display screen. The second
line appearing on the display will most likely list the features you can
access with the softkeys.
The tone that appears in curly quotes after a step, such as {dial tone},
indicates what you should hear from your handset (or speakerphone)
after successfully performing that step.
Feature Finder
Make a Call
9610 IP Telephone End User Guide | 4 |
P a g e