KitchenAid KESC300BWH6 Instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación para Horno KitchenAid KESC300BWH6. KitchenAid KESC300BWH6 5 páginas. 30" (76.2 cm) electric range with self-cleaning thermal/convection oven
También para KitchenAid KESC300BWH6: Manual de uso y mantenimiento (5 páginas)

Imprimir página

Before you start...

Your safety and the safety of others

are very important.

We have provided many important safety

messages in this manual and on your appliance.

Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards

can kill or hurt you and others.

All safety messages will follow the safety alert

symbol and either the word "DANGER"or

"WARNING". These words mean:

You can be killed or seriously injured if you

don't immediately follow instructions.

You can be killed or seriously injured if you

don't follow instructions.

All safety messages will tell you what the potential

hazard is, tell you how to reducethe chance of

injury, and tell you what can happen if the

instructions are not followed.

Cabinet

opening

dimensions

25" (63.5 cm) countertop

depth

and 24" (61 cm) base cabinet

depth,

36" (91.4 cm) countertop

height

Freestanding

Range

Slide-in

Range

For minimum

['_13"

_33 cm} max.__

For minimum

13"(33cm)

max.

I__

clearance

uppercabinet'depth

[//

clearance

upper

cabinet

depth

_-_

the top

of the

30" _7&2

cm_ rnin-

.L.

the

top of the

"_"

cooktop

see

_hi'_

.....

cooktop

see

50" 1 75.2

cm_ m_n. L..."oto.

............

_ .ore.

cabinet opening

width

_--'_..

18" (45.7 cm)

I"__'_

upper cabinet

opening aep

upper cabinet

--"_:_

to countertop _

"_-"_

tooountertop

__"

"_"-

1/2"(1._)1

"_.

"_-.

opening

width

"_"_"_

"_,

corners

30-3/8"

(77 2 cm)

4" (10.2

cm)

,,,i..

_,_._._=

rain. clearance

from both sides

junction

box -

of range to side

_ junction

box - 8" (20.3 cm) to

of range to side

8" (20.3 cm) to

wall or other

22" (55.9 cm) from either

wall or other

22" (55.9 cm) from

combustible

cabinet,

7" (17.8 cm) max. from

combustible

either

cabinet,

material,

floor.

material.

7" (17.8 cm) max.

from floor.

_-|1/I

7/8"

rain.

required

min. required

}

between

cutout

and

cabinet

and cabinet

door or hinge.

.,,

door or hinge.

Read electrical

and carpentry instructions.

Proper installation is your responsibility. A

qualified technician must install this range. Make

sure you have everything necessary for correct

installation. It is the customer's responsibility to

make sure that the countertop has been properly

prepared and that the installation clearances

specified on the model/serial rating plate are

met. The model/serial rating plate is located on

the oven frame behind the drawer.

Check location

where range will be installed.

The range should be located for convenient use

in the kitchen. Recessed installations must

provide complete enclosure of the sides and rear

of range.

ALL OPENINGS IN THE WALL OR FLOOR

WHERE RANGE IS TO BE INSTALLED MUST

BE SEALED.

IMPORTANT: Some cabinet and building

materials are not designed to withstand the heat

produced by the oven for baking and self-

cleaning. Check with your builder or cabinet

supplier to make sure that the materials used

will not discolor, delaminate or sustain other

damage.

It is the customer's responsibility:

To contact a qualified

electrical

installer.

To assure that the electrical

installation

adiquate

and in conformance

with National

Electrical

Code, ANSI/NFPA 70 -- latest

edition*,

or CSA Standard

C22.1, Canadian

Electrical

Code, Part 1 -- latest edition**,

and

all local codes and ordinances.

Note: The metal chassis of the range MUST be

grounded in order for the control panel to work. If

the metal chassis of the range is not grounded, NO

keypads will operate. Check with a qualified

electrician if you are in doubt as to whether the

metal chassis of range is grounded.

Mobile home installation

The installation of this range must conform to the

Manufactured Home Construction and Safety

Standards, Title 24 CFR, Part 3280 (formerly the

Federal Standard for Mobile Home Construction

and Safety, Title 24, HUD, Part 280); or when such

standard is not applicable, the Standard for

Manufactured Homes Installations (Manufactured

Home Sites, Communities and Setups), ANSI

A225.1/NFPA 501A, or with local codes*.

In Canada, the installation of this range must

conform with the current standards

CAN/CSA-Z240 i

latest edition**, or with local

codes.

When this range is installed in a mobile home, it

must be secured to the floor during transit. Any

method of securing the range is adequate as long

as it conforms to the standards listed above.

Four-wire power supply cable must be used in a

mobile home installation. The appliance wiring will

need to be revised. See four-wire electrical

connection, Panel B.

Copies of the standards listed may be obtained from:

* National Fire Protection Association

One Batterymarch

Park

Quincy, Massachusetts

02269

** Canadian

Standard

Association

178 Rexdale Boulevard

Rexdale (Toronto), Ontario Mew 1R3

Panel A

important: Observe all governing

codes and

ordinances.

When installing a range under existing cabinets

and the installation does not meet the minimum

cabinet clearances, install a range hood above

the cooktop to avoid burn hazards.

Grounded

electrical

outlet is required. See

"Electrical requirements," Panel B.

Cabinet opening

dimensions

that are shown

must be used. Given dimensions are minimum

clearances.

Do Not pinch the power supply

cord between

the range and the wall.

Do Not seal range to side cabinets.

Slide-in

Note: 24" (81 cm) rain. when bottom

of wood or metal

cabinet

is protected

by not less than 1/4" (0.64 cm)

flame retardant

miUboard

covered

with not less than

No. 28 MSG sheet steel, 0.015" (0.4 ram) stainless

steel,

0.024" (0.6 ram) aluminum

or 0.020" (0.5 ram) copper.

30" (78.2 cm) rain. clearance

between

the top of the

cooking

platform

and the bottom

of an unprotected

wood or metal cabinet.

Anti-tip

bracket:

The floor anti-tip

bracket

MUST be installed. To

install the anti-tip

bracket

shipped

with the range,

see Panel C and the

anti-tip

bracket template.

ranges:

countertop

preparation

The cooktop sides of the slide-in range fit over

the cutout edge of your countertop.

If you have a square finish (flat) countertop

and the opening width is 30-3/8" (77.2 cm), no

countertop preparation is required.

Formed front-edged

countertops:

Must have

molded edge shaved flat 1!4" (0.64 cm) from

each front corner of opening.

Tile countertops

may need trim cut back

1/4" (0.64 cm) from each front corner and/or

rounded edge flattened.

30-3/8"

......

(77.2 cm

ope.nm

.1/4"

width

(0 64 cm)

30-7/8"

Formed

or tiled countertop

(78.4 cm)

trimmed

1/4" (0.64 cm)

_./

back at front corners

countertop

opening.

Product dimensions

Freestanding

Range

(76.2 cm)_

cooktop

width

8-1/4"

(21 cm)

_-- 44-3/8"

(112.7 cm)

overall

height

36" (91.4 cm)

cooktop

height with

feet loosened

1-1/2 turns

27-3/4"

(70.5 cm)

depth with

handle

(76.2 cm)

width

If countertop opening width

is greater than

30-3/8" (77.2 cm), adjust the 1/4" (0.64 cm)

dimension.

Countertop

must be level. Place level on

countertop, first side to side; then front to back. If

countertop is not level, range will not be level.

Oven must be level for satisfactory baking

conditions.

Cooktop

sides of range fit over

edges of countertop

opening.

Slide-in

Range

When installed

in a 24"

(61 cm) base cabinet

with

25" (63.5 cm) countertop

front of oven door

protrudes

1-7/8" (4.8 cm)

beyond

24" (61 cm) base

cabinet.

38" (91.4 cm)

cooktop

height with

feet loosened

1-1/2 turns

(2.Scm)

25-3/4"

(65.4 cm)

depth

handle

(78.2 cm)

width