Lexmark C925 Referencia rápida - Página 3

Navegue en línea o descargue pdf Referencia rápida para Impresora Lexmark C925. Lexmark C925 10 páginas. Setup sheet
También para Lexmark C925: Manual del administrador (20 páginas), Manual del administrador (12 páginas), Manual de conexión (7 páginas), Nota de publicación (4 páginas), Manual del administrador (13 páginas), Manual de mantenimiento (15 páginas), Manual (14 páginas), Manual del administrador (12 páginas), Manual en papel (3 páginas), Mapa del menú (2 páginas), Manual de mudanzas (2 páginas), Manual de suministros (2 páginas), Manual de información (1 páginas), Manual de defectos de impresión (1 páginas), Instalación (2 páginas), Referencia rápida (12 páginas), Formación (18 páginas)

Imprimir página
Lexmark C925 Referencia rápida
2
Gently pull the extension until it is fully extended.
3
Flex the sheets of paper or specialty media back and forth to
loosen them. Do not fold or crease them. Straighten the edges on
a level surface.
Paper
Envelopes
Transparencies
Note: Avoid scratching or touching the print side.
4
Load the paper or specialty media. Slide the stack gently into the
multipurpose feeder until it comes to a stop.
Notes:
•
Load A3-, A6-, 11x17, JIS B4-, Statement- and legal-size media
in short-edge orientation.
•
Load A4-, A5-, Exec-, JIS B5- and letter-size media in long-edge
orientation.
•
Load envelopes flap side up in short-edge orientation.
•
Do not exceed the maximum amount of media that the
multipurpose feeder can hold.
•
Load only one size and type of paper at a time.
Long-edge orientation
Short-edge orientation
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self-stick
adhesives. These envelopes may severely damage the printer.
3
5
Adjust the width guide to lightly touch the edge of the stack. Make
sure the paper or specialty media fits loosely in the multipurpose
feeder, lies flat, and is not bent or wrinkled.
6
From the printer control panel, set the Paper Size and Paper Type
for the multipurpose feeder (MP Feeder Size and MP Feeder Type)
based on the paper or specialty media loaded.

Linking and unlinking trays

Linking trays
Tray linking is useful for large print jobs or for printing multiple copies.
When one linked tray is empty, paper feeds from the next linked tray.
When the Paper Size and Paper Type settings are the same for any
trays, the trays are automatically linked. The Paper Size setting is
automatically sensed according to the position of the paper guides
in each tray except Tray 1 and the multipurpose feeder. The Paper
Size setting for the multipurpose feeder must be set manually from
the Paper Size menu. The Paper Type setting must be set for all trays
from the Paper Type menu. The Paper Type menu and the Paper Size
menu are both available from the Paper Size/Type menu.
Unlinking trays
Note: Trays that do not have the same settings as any other tray are
not linked.
Change one of the following tray settings:
•
Paper Type
Paper Type names describe the paper characteristics. If the name
that best describes your paper is used by linked trays, assign a