Gardena Dirty Water Pump 6000 SP Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Bomba de agua Gardena Dirty Water Pump 6000 SP. Gardena Dirty Water Pump 6000 SP 12 páginas. Submersible pump/dirty water pump
Imprimir página
3. Using the Pump for the First Time
Hose diameter
Hose connection
of universal fitting
k
©
a
k
©
b
Hose connection
Connection kits needed
for 13 - 19 mm hoses:
Connecting the hose:
12
13 mm (1/2")
15 mm (5/8")
19 mm (3/4")
k
©
a
©
Cut off topmost
nipple at
13 mm (1/2"): GARDENA Pump Connection Set, Art. No. 1750
15 mm (5/8"): GARDENA Tap Connector, Art. No. (2)902, and
19 mm (3/4"): GARDENA Pump Connection Set, Art. No. 1752
Best results in delivery capacity are achieved when using
38 mm (1
1
The universal fitting
the table above.
1. Screw L-piece
2. Cut off nipples of the universal
to match the hose connection.
3. Screw the universal fitting
4. Connect the hose to the universal fitting
©
We recommend that 38 mm (1
be fastened with an additional GARDENA hose clamp Art. No.
7193.
Only for 13 mm (1/2") hose:
The universal fitting
©
Regulator Valve Art. No. (2)977 so that the contents of the out-
let line do not flow back through the pump after pumping. The
Regulator Valve can be ordered from your GARDENA dealer.
25 mm (1")
Do not cut off any
k
a
nipples
Standard Hose Connector, Art. No. (2)916
/
") hoses.
2
llows connection of all the hoses listed in
into the pump.
onto the pump.
1
/
2
can also be equipped with a GARDENA
38 mm (1
k
©
b
Cut off top two
nipples at
fitting which are not needed,
.
")- and 25 mm (1") hoses should
1
/
")
2
k
b