Gardena Dirty Water Pump 6000 SP 사용 설명서 - 페이지 4

{카테고리_이름} Gardena Dirty Water Pump 6000 SP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena Dirty Water Pump 6000 SP 12 페이지. Submersible pump/dirty water pump

페이지 인쇄

3. Using the Pump for the First Time

Hose diameter

Hose connection

of universal fitting

Hose connection

Connection kits needed

for 13 - 19 mm hoses:

Connecting the hose:

13 mm (1/2")

15 mm (5/8")

19 mm (3/4")

Cut off topmost

nipple at

13 mm (1/2"): GARDENA Pump Connection Set, Art. No. 1750

15 mm (5/8"): GARDENA Tap Connector, Art. No. (2)902, and

19 mm (3/4"): GARDENA Pump Connection Set, Art. No. 1752

Best results in delivery capacity are achieved when using

38 mm (1

The universal fitting

the table above.

1. Screw L-piece

2. Cut off nipples of the universal

to match the hose connection.

3. Screw the universal fitting

4. Connect the hose to the universal fitting

We recommend that 38 mm (1

be fastened with an additional GARDENA hose clamp Art. No.

7193.

Only for 13 mm (1/2") hose:

The universal fitting

Regulator Valve Art. No. (2)977 so that the contents of the out-

let line do not flow back through the pump after pumping. The

Regulator Valve can be ordered from your GARDENA dealer.

25 mm (1")

Do not cut off any

nipples

Standard Hose Connector, Art. No. (2)916

") hoses.

llows connection of all the hoses listed in

into the pump.

onto the pump.

can also be equipped with a GARDENA

38 mm (1

Cut off top two

nipples at

fitting which are not needed,

")- and 25 mm (1") hoses should