Avaya 4600 Series Instrucciones de instalación y seguridad - Página 5
Navegue en línea o descargue pdf Instrucciones de instalación y seguridad para Teléfono Avaya 4600 Series. Avaya 4600 Series 11 páginas. Infrared dialing
También para Avaya 4600 Series: Conexión (14 páginas), Instrucciones de seguridad (11 páginas), Información sobre el producto (2 páginas), Manual (4 páginas)
Imprimir página
Ethernet Adapter markings is a good first step in determining which agency approvals have been granted.
For inquiries regarding specific certifications, contact your local or regional Avaya representative.
To order copies of this and other documents:
Call: Avaya Publications Center
Voice 1.800.457.1235 or 1.207.866.6701
FAX 1.800.457.1764 or 1.207.626.7269
Write: Globalware Solutions
200 Ward Hill Avenue
Haverhill, MA 01835 USA
Attention: Avaya Account Management
E-mail: [email protected]
For the most current versions of documentation, go to the Avaya support
Web site:
http://www.avaya.com/support
Sources of Information
For information about the Gigabit Ethernet Adapter or instructions on how to install it, refer to this instruction
booklet packed with the product.
Gigabit Ethernet Adapter Description
This Gigabit Ethernet Adapter is a mini Ethernet switch with PoE (Power-over-Ethernet) support. It features 3
Ethernet ports: one PoE-enabled 10/100/1000mbps uplink port (connect to the 1000mbps Ethernet wall
socket), one PoE-enabled 10/100mbps downlink port (connect to your IP Phone), and one 10/100/1000mbps
download port (connect to your computer). With this
computer and IP Phone to the Ethernet network simultaneously.
Gigabit Ethernet Adapter For 4600 and 5600 Series IP Phones
Gigabit Ethernet Adapter
This
4602SW, 4602SW+, 4610SW, 4620, 4620SW, 4621SW, 4622SW, 4625SW, 4630SW
5602SW, 5602SW+, 5610SW, 5620SW, 5621SW
Note
:
Other IP phones may also work but are not supported.
Gigabit Ethernet Adapter
The
IEEE 802.3 standard.
Note
:
the Avaya-Cajun P580 Gigabit card does not support the Carrier Extend Signal and should not be used
in conjunction with this
Note:
Failure to use and install as directed could result in injury. No other use of the
Adapter
is recommended or warranted. At the time of publication, every effort has been made to insure
accuracy of this manual. However, it is possible that 1) some omissions have occurred, or 2) new products
have since been introduced that use the
Gigabit Ethernet Adapter
suitability of this
contact your local Avaya representative for assistance.
CAUTION:
This Gigabit Ethernet Adapter can only be used with telecommunication and computer equipment, indoors, in
a controlled environment.
Operation
Before you deploy the
connections between Ethernet wall socket, IP Phone, and computer, and then switch them off.
Build the Ethernet connection between Ethernet wall socket and the uplink port of the
Adapter,
and check the status of power indicator LED now. If it illuminates, it means the Ethernet wall socket
you connected to supports PoE; if not, please connect the optional power supply to the
Adapter's
power connector. Before you proceed to next step, the power indicator must be illuminated. Build
the connection between your IP Phone and the
check the state of the power indicator LED again. If it's still illuminated, proceed to next step; if not, please
4
.
can be used with following IP Phone products:
will operate with Gigabit Ethernet switches that are fully compliant with the
Gigabit Ethernet Adapter
Gigabit Ethernet Adapter
for a particular application, check your product documentation or
Gigabit Ethernet Adapter
Gigabit Ethernet Adapter
.
. If you are unsure concerning the
in your network environment, please disconnect all Ethernet
Gigabit Ethernet Adapter's
, you can connect your
Gigabit Ethernet
Gigabit Ethernet
Gigabit Ethernet
IP Phone downlink port now, and