Avaya 4600 Series Інструкції з монтажу та техніки безпеки - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкції з монтажу та техніки безпеки для Телефон Avaya 4600 Series. Avaya 4600 Series 11 сторінок. Infrared dialing
Також для Avaya 4600 Series: Підключення (14 сторінок), Інструкції з техніки безпеки (11 сторінок), Інформація про продукт (2 сторінок), Посібник (4 сторінок)

Друкувати сторінку

Avaya 4600 Series Інструкції з монтажу та техніки безпеки

Ethernet Adapter markings is a good first step in determining which agency approvals have been granted.

For inquiries regarding specific certifications, contact your local or regional Avaya representative.

To order copies of this and other documents:

Call: Avaya Publications Center

Voice 1.800.457.1235 or 1.207.866.6701

FAX 1.800.457.1764 or 1.207.626.7269

Write: Globalware Solutions

200 Ward Hill Avenue

Haverhill, MA 01835 USA

Attention: Avaya Account Management

E-mail: [email protected]

For the most current versions of documentation, go to the Avaya support

Web site:

http://www.avaya.com/support

Sources of Information

For information about the Gigabit Ethernet Adapter or instructions on how to install it, refer to this instruction

booklet packed with the product.

Gigabit Ethernet Adapter Description

This Gigabit Ethernet Adapter is a mini Ethernet switch with PoE (Power-over-Ethernet) support. It features 3

Ethernet ports: one PoE-enabled 10/100/1000mbps uplink port (connect to the 1000mbps Ethernet wall

socket), one PoE-enabled 10/100mbps downlink port (connect to your IP Phone), and one 10/100/1000mbps

download port (connect to your computer). With this

computer and IP Phone to the Ethernet network simultaneously.

Gigabit Ethernet Adapter For 4600 and 5600 Series IP Phones

Gigabit Ethernet Adapter

This

4602SW, 4602SW+, 4610SW, 4620, 4620SW, 4621SW, 4622SW, 4625SW, 4630SW

5602SW, 5602SW+, 5610SW, 5620SW, 5621SW

Note

Other IP phones may also work but are not supported.

Gigabit Ethernet Adapter

The

IEEE 802.3 standard.

Note

the Avaya-Cajun P580 Gigabit card does not support the Carrier Extend Signal and should not be used

in conjunction with this

Note:

Failure to use and install as directed could result in injury. No other use of the

Adapter

is recommended or warranted. At the time of publication, every effort has been made to insure

accuracy of this manual. However, it is possible that 1) some omissions have occurred, or 2) new products

have since been introduced that use the

Gigabit Ethernet Adapter

suitability of this

contact your local Avaya representative for assistance.

CAUTION:

This Gigabit Ethernet Adapter can only be used with telecommunication and computer equipment, indoors, in

a controlled environment.

Operation

Before you deploy the

connections between Ethernet wall socket, IP Phone, and computer, and then switch them off.

Build the Ethernet connection between Ethernet wall socket and the uplink port of the

Adapter,

and check the status of power indicator LED now. If it illuminates, it means the Ethernet wall socket

you connected to supports PoE; if not, please connect the optional power supply to the

Adapter's

power connector. Before you proceed to next step, the power indicator must be illuminated. Build

the connection between your IP Phone and the

check the state of the power indicator LED again. If it's still illuminated, proceed to next step; if not, please

can be used with following IP Phone products:

will operate with Gigabit Ethernet switches that are fully compliant with the

Gigabit Ethernet Adapter

for a particular application, check your product documentation or

Gigabit Ethernet Adapter

. If you are unsure concerning the

in your network environment, please disconnect all Ethernet

Gigabit Ethernet Adapter's

, you can connect your

Gigabit Ethernet

IP Phone downlink port now, and