Alico Optima BR24 Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Punto de acceso inalámbrico Alico Optima BR24. Alico Optima BR24 12 páginas. Wireless network equipment optima series
También para Alico Optima BR24: Manual de instrucciones (14 páginas)

Imprimir página
Checking the Wireless Setup
1. Click on the "Wireless" button
on the left column of the
WinBox window
2.
Then double click on the
"wlan1" line
3.
You will see the window as
shown below. This window has
tabs on the top and buttons on the
right side.
4.
Please note that some of the tabs
are hidden, to look at all the tabs
click on the "..." square button at
the end of the tabs to see the list
as shown.
5.
The AP24 is setup as a 2.4GHz
b/g access point
6.
You can change the SSID if you
like. To hide the SSID click on
the check mark at the bottom of
the window
7.
The AP24 is setup with manually set frequency channels. If you want the AP24 to auto select the
frequency setup the DFS mode to either "no radar detect" or "radar detect". In the "no radar
detect" mode the AP24 scans for the frequency with the lowest interference and selects that
frequency. In the "radar detect mode" the AP24 selects the frequency like the "no radar detect"
mode, and switches frequency if there is interference afterwards.

Using the Web Interface

The AP24/58 can also be
accessed using a web browser.
However please note the web
interface has limited
functionality. Full functionality
can only be achieved either via
the Winbox or using the built in
command line interface. To use
the command line interface you
can either use the Terminal
inside the Winbox window or
login via Telnet or SSH.
11