Alico Optima BR24 Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Titik Akses Nirkabel Alico Optima BR24. Alico Optima BR24 12 halaman. Wireless network equipment optima series
Juga untuk Alico Optima BR24: Buku Petunjuk (14 halaman)

Halaman Cetak

Checking the Wireless Setup

1. Click on the "Wireless" button

on the left column of the

WinBox window

Then double click on the

"wlan1" line

You will see the window as

shown below. This window has

tabs on the top and buttons on the

right side.

Please note that some of the tabs

are hidden, to look at all the tabs

click on the "..." square button at

the end of the tabs to see the list

as shown.

The AP24 is setup as a 2.4GHz

b/g access point

You can change the SSID if you

like. To hide the SSID click on

the check mark at the bottom of

the window

The AP24 is setup with manually set frequency channels. If you want the AP24 to auto select the

frequency setup the DFS mode to either "no radar detect" or "radar detect". In the "no radar

detect" mode the AP24 scans for the frequency with the lowest interference and selects that

frequency. In the "radar detect mode" the AP24 selects the frequency like the "no radar detect"

mode, and switches frequency if there is interference afterwards.

Using the Web Interface

The AP24/58 can also be

accessed using a web browser.

However please note the web

interface has limited

functionality. Full functionality

can only be achieved either via

the Winbox or using the built in

command line interface. To use

the command line interface you

can either use the Terminal

inside the Winbox window or