AlienTek T12 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Pistola de soldar AlienTek T12. AlienTek T12 16 páginas. Smart soldering station

ALIENTEK

Note: The soldering station has calibrated. The default is the soldering iron tip 1. If

there is no professional soldering iron temperature measuring instrument, it is not

recommended to recalibrate!

6.6 Beep set

The beeper is used to indicate that the iron temperature reaches the target temperature ("beep

beep"), power on ("beep"), enters boost mode, and exits boost mode ("beep"). The default is open

and the user can turn it on or off as needed.

In the standby state, after the soldering iron temperature drops from the sleep temperature to

50 ° C, if the automatic shutdown is turned on, the device enter the countdown state, and the

system is turned off after the countdown ends. If Auto Power Off is off, it remains in standby.

Input min voltage: When the AC power supply is disconnected from the external battery, the

voltage is lower than this value, the soldering iron stops heating, and the system will warn that the

T100 Smart Soldering station

Fig 6.7 beep set

Fig 6.8 auto shutdown

Fig 6.9 DC Power

User Manual