AlienTek T12 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Pistola de soldar AlienTek T12. AlienTek T12 16 páginas. Smart soldering station

AlienTek T12 Manual del usuario
ALIENTEK

7. Firmware upgrade

1.
Disconnect the power supply, disconnect the handle and the host, use cable to connect the
USB to TTL serial port module and the host according to the following Figure 7.1
connection.
Press and hold the encoder then power on, wait until the screen displays "Firmware Upgrade"
2.
and release the encoder, as shown in Figure 7.2 below.
3.
Open the firmware upgrade software, select the serial port number, open the serial port, select
the serial port upgrade, open the upgrade file (.atk file), and finally click start upgrade and
wait for the upgrade to complete. The operation is shown in Figure 7.3 below.
T100 Smart Soldering station
Fig 7.1 upgrade connection
Fig 7.2 enter upgrade
11
User Manual