Garmin Zumo 660 Manual de inicio rápido - Página 9

Navegue en línea o descargue pdf Manual de inicio rápido para GPS Garmin Zumo 660. Garmin Zumo 660 28 páginas. Garmin gps receiver - car gps user manual
También para Garmin Zumo 660: Instrucciones de instalación (4 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (8 páginas), Manual del usuario (48 páginas), Manual de inicio rápido (8 páginas), Manual de instrucciones de instalación (46 páginas), (alemán) Guía de inicio rápido (8 páginas)

Garmin Zumo 660 Manual de inicio rápido
zCimo
660 Installation Instructions
Mount Your zOmo on the Motorcyle
W RIG: IncoITectly \viring the power cable with bare wire lead can re ult in
damage to th vehicl or the battery and can cause bodiI" injury. Gannin trongly
recol1llnend ha ing an exp rienced in taller with the prop r kno\! "ledge of electrical
sy terns in tall the unit.
See the Important SafeZl' and Product b!!orma/;on guide in the product box for product warning
and other important infoffilation.
Mini-USB connector
(for traffic receiever)
Bare wires with
inline fuse for
power connection
Cradle
Step 1: Connect Power to the Mount
Select a suitable and secure location to tnount the zutno on your tTIotorcycle, based on
available power ources and safe cable routing.
Headphone/audio out jack
(3.5
mm)
Microphone jack
(2.5
mm)
Step 2: Install the Handlebar Base
The ziimo includes parts for two handlebar installation solutions. Custom 11lounts can
require additional hardware (www.ratn-mount.cOlTI).
A) To install the U-bolt and handlebar base:
1. Place the U-bolt around the handlebar, and thread the ends through the handlebar
base.
2. Tighten the nuts to secure the base. Do not overtighten.
OTE: The reconunended torque is 50 Ibf-in. Do not exceed torque of 80 Ibf-in.
Handlebar
V-bolt