Garmin Zumo 660 Snelstarthandleiding - Pagina 9

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Garmin Zumo 660. Garmin Zumo 660 28 pagina's. Garmin gps receiver - car gps user manual
Ook voor Garmin Zumo 660: Installatie-instructies (4 pagina's), Snelstarthandleiding (8 pagina's), Snelstarthandleiding (8 pagina's), Gebruikershandleiding (48 pagina's), Snelstarthandleiding (8 pagina's), Handleiding voor installatie-instructies (46 pagina's), (Duitse) Beknopte handleiding (8 pagina's)

zCimo

660 Installation Instructions

Mount Your zOmo on the Motorcyle

W RIG: IncoITectly \viring the power cable with bare wire lead can re ult in

damage to th vehicl or the battery and can cause bodiI" injury. Gannin trongly

recol1llnend ha ing an exp rienced in taller with the prop r kno\! "ledge of electrical

sy terns in tall the unit.

See the Important SafeZl' and Product b!!orma/;on guide in the product box for product warning

and other important infoffilation.

Mini-USB connector

(for traffic receiever)

Bare wires with

inline fuse for

power connection

Cradle

Step 1: Connect Power to the Mount

Select a suitable and secure location to tnount the zutno on your tTIotorcycle, based on

available power ources and safe cable routing.

Headphone/audio out jack

(3.5

mm)

Microphone jack

(2.5

mm)

Step 2: Install the Handlebar Base

The ziimo includes parts for two handlebar installation solutions. Custom 11lounts can

require additional hardware (www.ratn-mount.cOlTI).

A) To install the U-bolt and handlebar base:

1. Place the U-bolt around the handlebar, and thread the ends through the handlebar

base.

2. Tighten the nuts to secure the base. Do not overtighten.

OTE: The reconunended torque is 50 Ibf-in. Do not exceed torque of 80 Ibf-in.

Handlebar

V-bolt