Garmin GPS 400W Manual de consulta rápida - Página 11
Navegue en línea o descargue pdf Manual de consulta rápida para Sistema GPS marino Garmin GPS 400W. Garmin GPS 400W 25 páginas. Garmin gps receiver quick reference guide
También para Garmin GPS 400W: Apéndice del Manual del Piloto (24 páginas), Apéndice del Manual del Piloto (50 páginas), Referencia rápida (23 páginas), Apéndice del Manual del Piloto (24 páginas), Manual complementario (12 páginas)
Imprimir página
DEFAULT NAV PAGE / ANNUNCIATORS
Default NAV Page
Course
Deviation
Indicator (CDI)
Active Leg of
Flight Plan
The following symbols are used (directly below the
CDI) to depict the active leg of a flight plan or direct-to:
Course to a Waypoint, or Desired Course between Two Waypoints
Direct-To a Waypoint
Left-hand Holding Pattern
Right-hand Holding Pattern
DME Arc to the left
To Quickly Display the Default NAV Page
From any page, press and hold the CLR key for
1.
approximately two seconds.
Bottom Row Annunciators and Messages
Terrain annunciations:
Ter Test, Ter N/A, Terrain, Ter INHB,
and TER Fail
CDI/RAIM Mode: Approach (LNAV,
LNAV+V, L/VNAV, or LPV ), Oceanic
(OCN), Terminal (TERM), En Route
(ENR) or "0.30" (if the CDI is manu-
ally set to "0.30" and not flying an ap-
proach). Annunciations not applicable
to the external CDI when VLOC is
active.
GPS Integrity Failure
To Select a Different Data Item for any Data Field
TO/FROM
Flag
User-selectable
Data Fields
Vectors-To-Final
Right Procedure Turn
Left Procedure Turn
DME Arc to the right
Navigation Source:
(SUSP), OBS or blank (for
GPS, VLOC, or GPS-PTK
190-00356-01 Rev F
1.
With the default NAV page displayed, press the
MENU key to display an options menu.
2.
Turn the large right
knob to highlight the
"Change Fields?" option,
and press the ENT key to
select this option.
3.
Use the large right knob
to highlight the data field
you wish to change.
4.
Turn the small right
knob to display the list
of available data items.
Continue turning the
small right knob to
select the desired data
item from the list.
5.
Press the ENT key to select the desired data item
and return to the default NAV page.
Press the small right knob to remove the cursor
6.
from the page.
Message Annunciator: Flashing (new mes-
sage), On, or blank (no message)
Page Annunciator (NAV/WPT/AUX/
OBS Mode: Suspend
NRST/FPL/VNAV/PROC), Waypoint
Alert ("NEXT DTK"), Turn Advisory
auto-sequencing)
("LT TO xxxº"), etc.
9