Garmin GPS 400W Quick Reference Manual - Page 11

Browse online or download pdf Quick Reference Manual for Marine GPS System Garmin GPS 400W. Garmin GPS 400W 25 pages. Garmin gps receiver quick reference guide
Also for Garmin GPS 400W: Pilot's Manual Addendum (24 pages), Pilot's Manual Addendum (50 pages), Quick Reference (23 pages), Pilot's Manual Addendum (24 pages), Supplementary Manual (12 pages)

Print Page

1. Model Descriptions

DEFAULT NAV PAGE / ANNUNCIATORS

Default NAV Page

Course

Deviation

Indicator (CDI)

Active Leg of

Flight Plan

The following symbols are used (directly below the

CDI) to depict the active leg of a flight plan or direct-to:

Course to a Waypoint, or Desired Course between Two Waypoints

Direct-To a Waypoint

Left-hand Holding Pattern

Right-hand Holding Pattern

DME Arc to the left

To Quickly Display the Default NAV Page

From any page, press and hold the CLR key for

approximately two seconds.

Bottom Row Annunciators and Messages

Terrain annunciations:

Ter Test, Ter N/A, Terrain, Ter INHB,

and TER Fail

CDI/RAIM Mode: Approach (LNAV,

LNAV+V, L/VNAV, or LPV ), Oceanic

(OCN), Terminal (TERM), En Route

(ENR) or "0.30" (if the CDI is manu-

ally set to "0.30" and not flying an ap-

proach). Annunciations not applicable

to the external CDI when VLOC is

active.

GPS Integrity Failure

To Select a Different Data Item for any Data Field

TO/FROM

Flag

User-selectable

Data Fields

Vectors-To-Final

Right Procedure Turn

Left Procedure Turn

DME Arc to the right

Navigation Source:

(SUSP), OBS or blank (for

GPS, VLOC, or GPS-PTK

190-00356-01 Rev F

With the default NAV page displayed, press the

MENU key to display an options menu.

Turn the large right

knob to highlight the

"Change Fields?" option,

and press the ENT key to

select this option.

Use the large right knob

to highlight the data field

you wish to change.

Turn the small right

knob to display the list

of available data items.

Continue turning the

small right knob to

select the desired data

item from the list.

Press the ENT key to select the desired data item

and return to the default NAV page.

Press the small right knob to remove the cursor

from the page.

Message Annunciator: Flashing (new mes-

sage), On, or blank (no message)

Page Annunciator (NAV/WPT/AUX/

OBS Mode: Suspend

NRST/FPL/VNAV/PROC), Waypoint

Alert ("NEXT DTK"), Turn Advisory

auto-sequencing)

("LT TO xxxº"), etc.