Garmin TR-1 Gold Manual de funcionamiento básico - Página 3

Navegue en línea o descargue pdf Manual de funcionamiento básico para Sistema GPS marino Garmin TR-1 Gold. Garmin TR-1 Gold 9 páginas. Throttle actuator
También para Garmin TR-1 Gold: Manual del usuario (38 páginas), Referencia rápida (2 páginas), Instrucciones de montaje (7 páginas), Instrucciones de instalación (4 páginas), Referencia rápida del mando a distancia del propietario (2 páginas)

The next two basic operations are factory defaults and may be changed by user at any

Pushing and releasing the Idle/Resume button will cause the motor to go to idle.

Press and release the button again and the motor will return to its previous RPM

setting. To use this button as a MOB (man overboard) or Zig-Zags see page 4.

Bent Arrow Buttons are programmed from the factory for Remote Steering. No Heading hold operations

are available while using this feature. If you wish to program the bent arrows for Step Turns or Circles, see

page 4.

How to adjust throttle:

Throttle up button, press and hold for large RPM changes or momentarily press for

small RPM changes. LED in upper left will illuminate every time button is pressed.

Throttle down button, press and hold for large RPM change or momentarily press for

small RPM changes. LED in lower left will illuminate every time button is pressed

time using the feature operation changes.

When the button is pressed the LED next to 6 will come on, the system will drop

out of autopilot and put you in a port remote turn. To return to autopilot press and

release the left straight arrow button.

When the button is pressed the LED next to 9 will come on, the system will drop

out of autopilot and put you in a starboard remote turn. To return to autopilot

press and release the right straight arrow button.