Garmin TR-1 Gold 기본 작동 매뉴얼 - 페이지 3

{카테고리_이름} Garmin TR-1 Gold에 대한 기본 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin TR-1 Gold 9 페이지. Throttle actuator
Garmin TR-1 Gold에 대해서도 마찬가지입니다: 소유자 매뉴얼 (38 페이지), 빠른 참조 (2 페이지), 설치 지침 (7 페이지), 설치 지침 (4 페이지), 소유자 핸드헬드 빠른 참조 (2 페이지)

페이지 인쇄
Garmin TR-1 Gold 기본 작동 매뉴얼
The next two basic operations are factory defaults and may be changed by user at any
Pushing and releasing the Idle/Resume button will cause the motor to go to idle.
Press and release the button again and the motor will return to its previous RPM
setting. To use this button as a MOB (man overboard) or Zig-Zags see page 4.
Bent Arrow Buttons are programmed from the factory for Remote Steering. No Heading hold operations
are available while using this feature. If you wish to program the bent arrows for Step Turns or Circles, see
page 4.
How to adjust throttle:
Throttle up button, press and hold for large RPM changes or momentarily press for
small RPM changes. LED in upper left will illuminate every time button is pressed.
Throttle down button, press and hold for large RPM change or momentarily press for
small RPM changes. LED in lower left will illuminate every time button is pressed
time using the feature operation changes.
When the button is pressed the LED next to 6 will come on, the system will drop
out of autopilot and put you in a port remote turn. To return to autopilot press and
release the left straight arrow button.
When the button is pressed the LED next to 9 will come on, the system will drop
out of autopilot and put you in a starboard remote turn. To return to autopilot
press and release the right straight arrow button.
3