Garmin Boat Switch Manual de instrucciones de instalación
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Equipamiento marino Garmin Boat Switch. Garmin Boat Switch 27 páginas. Pre-configured digital switching system
Imprimir página
BOAT SWITCH PRE-CONFIGURED DIGITAL SWITCHING
Important Safety Information
Garmin
®
strongly recommends using a professional installer with proper knowledge of electrical systems to
install the device. Incorrectly installing the device can result in serious bodily injury and damage to the vessel or
the battery.
Failure to follow these cautions could result in bodily injury damage to the device and/or vessel, or poor product
performance.
This device must be installed according to these instructions.
Disconnect the vessel's power supply before beginning to install this product.
Before applying power to this product, make sure it has been correctly grounded according to the installation
instructions.
You must read all installation instructions before beginning the installation. If you do not understand the
installation needs of this device, or if you experience difficulty during the installation, contact Garmin Product
Support.
Setting up a Garmin Boat Switch
Follow these steps to set up a Garmin Boat Switch device on the vessel. Additional information and instructions
are contained in this document for your reference.
You should contact Garmin product support or your Garmin field service engineer (FSE) for assistance or if you
have any questions.
1 Mount the Garmin Boat Switch device
2 Connect the Garmin Boat Switch device to the NMEA 2000
page
5).
3 Connect the switched devices or circuits to the X1 wiring harness
wiring harness
(X2 Wiring Harness, page
4 Connect the Garmin Boat Switch device to power
5 Configure the Garmin Boat Switch device
February 2022
SYSTEM
INSTALLATION INSTRUCTIONS
Device
™
(Mounting the Garmin Boat Switch Device, page
10).
(Configuring the Device, page
WARNING
CAUTION
®
network
(NMEA 2000 Network Connection,
(X1 Wiring Harness, page
(Connecting to Power, page
17).
GUID-A4B2918E-C905-454D-967F-B0B7AB889986 v4
3).
7) and the X2
16).