Garmin Boat Switch Manual de instrucciones de instalación - Página 2
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Equipamiento marino Garmin Boat Switch. Garmin Boat Switch 27 páginas. Pre-configured digital switching system
Imprimir página
Mounting Considerations
Selecting the correct mounting location is critical to optimize the performance of the Garmin Boat Switch
device. When selecting a mounting location, observe these considerations.
• You must mount the device in an accessible location.
◦ All of the switches on this device can be activated by pressing buttons on the device directly. Because of
this, the device must be accessible in case there is an issue with switching using the chartplotter.
◦ Many of the settings on this device must be configured by connecting specific wires on the wiring harness
to a ground wire. Because of this the device must be accessible during the configuration process.
◦ This device uses software fuses, and if any of the fuses trip, you may need to reset them by pressing
buttons on the device directly. Because of this, the device must be accessible during use so you can reset
any tripped software fuses when needed.
• You must mount the device in a location where it is not submerged.
• You must mount the device on a flat, vertical mounting surface, with the wire harness connectors pointing
down.
• You must clear mounting surface of dirt, debris, wax, or coatings.
• Mounting hardware is not included with this device. You must provide pan-head screws of the appropriate
length for the mounting surface.
• You should select a location away from sources that can interfere with the device's operation. Sources of
interference may include strong electromagnetic fields, such as power cables and electric motors.
2