Garmin Boat Switch 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Garmin Boat Switch에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Boat Switch 27 페이지. Pre-configured digital switching system

Mounting Considerations

Selecting the correct mounting location is critical to optimize the performance of the Garmin Boat Switch

device. When selecting a mounting location, observe these considerations.

• You must mount the device in an accessible location.

◦ All of the switches on this device can be activated by pressing buttons on the device directly. Because of

this, the device must be accessible in case there is an issue with switching using the chartplotter.

◦ Many of the settings on this device must be configured by connecting specific wires on the wiring harness

to a ground wire. Because of this the device must be accessible during the configuration process.

◦ This device uses software fuses, and if any of the fuses trip, you may need to reset them by pressing

buttons on the device directly. Because of this, the device must be accessible during use so you can reset

any tripped software fuses when needed.

• You must mount the device in a location where it is not submerged.

• You must mount the device on a flat, vertical mounting surface, with the wire harness connectors pointing

down.

• You must clear mounting surface of dirt, debris, wax, or coatings.

• Mounting hardware is not included with this device. You must provide pan-head screws of the appropriate

length for the mounting surface.

• You should select a location away from sources that can interfere with the device's operation. Sources of

interference may include strong electromagnetic fields, such as power cables and electric motors.