Garmin GFS 10 - Fuel Sensor Referencia técnica - Página 8

Navegue en línea o descargue pdf Referencia técnica para Equipamiento marino Garmin GFS 10 - Fuel Sensor. Garmin GFS 10 - Fuel Sensor 30 páginas. Fuel sensor
También para Garmin GFS 10 - Fuel Sensor: Manual de consulta rápida (24 páginas), Manual de instrucciones de instalación (44 páginas), Información de seguridad importante (48 páginas), Manual de configuración (2 páginas), Declaración de conformidad (1 páginas), Manual de instrucciones de instalación (49 páginas)

NMEA 2000 Fundamentals

Linear Backbone Construction

Use the NMEA 2000 T-connectors to construct your NMEA 2000 backbone, and extend the backbone with appropriate lengths of backbone

cable if necessary. Use one T-connector per device. Use the sides of the T-connector to construct the backbone of the NMEA 2000 network, and

use the top of the T-connector to attach a NMEA 2000 device. By using only the sides of the T-connectors to construct the backbone, you create

a linear construction to your NMEA 2000 network. T-connectors can be separated by backbone cables or connected directly together.

Although the male and female connectors on the T-connectors and backbone cables will fit on all sides of a T-connector, it is very important to

use only the top of the T-connector to attach NMEA 2000 devices, not to attach other T-connectors or backbone cables.

To NMEA 2000 devices

and power

Female

terminator

Male

Backbone extension cable

terminator

Correct Linear Backbone Construction

To NMEA 2000 devices

and power

T-connector

installed incorrectly

Male

terminator

Male

Backbone extension cable

(also installed

terminator

incorrectly)

Incorrect Linear Backbone Construction

Technical Reference for Garmin NMEA 2000 Products