Garmin GFS 10 - Fuel Sensor Technische referentie - Pagina 8

Blader online of download pdf Technische referentie voor {categorie_naam} Garmin GFS 10 - Fuel Sensor. Garmin GFS 10 - Fuel Sensor 30 pagina's. Fuel sensor
Ook voor Garmin GFS 10 - Fuel Sensor: Snelle referentiehandleiding (24 pagina's), Handleiding voor installatie-instructies (44 pagina's), Belangrijke veiligheidsinformatie (48 pagina's), Configuratiehandleiding (2 pagina's), Conformiteitsverklaring (1 pagina's), Handleiding voor installatie-instructies (49 pagina's)

NMEA 2000 Fundamentals

Linear Backbone Construction

Use the NMEA 2000 T-connectors to construct your NMEA 2000 backbone, and extend the backbone with appropriate lengths of backbone

cable if necessary. Use one T-connector per device. Use the sides of the T-connector to construct the backbone of the NMEA 2000 network, and

use the top of the T-connector to attach a NMEA 2000 device. By using only the sides of the T-connectors to construct the backbone, you create

a linear construction to your NMEA 2000 network. T-connectors can be separated by backbone cables or connected directly together.

Although the male and female connectors on the T-connectors and backbone cables will fit on all sides of a T-connector, it is very important to

use only the top of the T-connector to attach NMEA 2000 devices, not to attach other T-connectors or backbone cables.

To NMEA 2000 devices

and power

Female

terminator

Male

Backbone extension cable

terminator

Correct Linear Backbone Construction

To NMEA 2000 devices

and power

T-connector

installed incorrectly

Male

terminator

Male

Backbone extension cable

(also installed

terminator

incorrectly)

Incorrect Linear Backbone Construction

Technical Reference for Garmin NMEA 2000 Products