AEG FAVORIT 44850 Información para el usuario - Página 30

Navegue en línea o descargue pdf Información para el usuario para Lavavajillas AEG FAVORIT 44850. AEG FAVORIT 44850 36 páginas. Aeg dishwasher favorit

AEG FAVORIT 44850 Información para el usuario
Installation and connection instructions

Connecting the dishwasher

Connecting to the water supply
• The dishwasher can be connected to cold and hot water supplies up
to max. 60°C.
• The dishwasher must not be connected to open hot water appliances
or instantaneous water heaters.
Permitted water pressure
Lowest permitted water pressure:
0,5 bar (=5 N/cm2 =50 kPa)
Highest permitted water pressure:
8 bar (=80 N/cm2 =0,8 MPa)
Connecting the inlet hose
The water inlet hose must not be kinked, crushed or entangled when it
is being connected up.
Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet
hose to a tap with an external thread (3/4 inch). The inlet hose is fitted
with either a plastic or a metal nut:
- Tighten the plastic nut hand tight only.
– You must tighten the metal nut using a tool.
Then do a visual check for water tightness (make sure that the tap is
not dripping).
• So that access to the tap in the kitchen is not limited by the use of
the dishwasher, we recommend installing an additional tap, or fitting
a T-branch to the existing tap.
30
Consult your installer if the water
pressure is less than 0,5 bar.
If the water pressure is greater than 8
bar, a pressure reduction valve must be
used (available from your dealer).