AEG FAVORIT 44850 사용자 정보 - 페이지 30

{카테고리_이름} AEG FAVORIT 44850에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG FAVORIT 44850 36 페이지. Aeg dishwasher favorit

Installation and connection instructions

Connecting the dishwasher

Connecting to the water supply

• The dishwasher can be connected to cold and hot water supplies up

to max. 60°C.

• The dishwasher must not be connected to open hot water appliances

or instantaneous water heaters.

Permitted water pressure

Lowest permitted water pressure:

0,5 bar (=5 N/cm2 =50 kPa)

Highest permitted water pressure:

8 bar (=80 N/cm2 =0,8 MPa)

Connecting the inlet hose

The water inlet hose must not be kinked, crushed or entangled when it

is being connected up.

Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet

hose to a tap with an external thread (3/4 inch). The inlet hose is fitted

with either a plastic or a metal nut:

- Tighten the plastic nut hand tight only.

– You must tighten the metal nut using a tool.

Then do a visual check for water tightness (make sure that the tap is

not dripping).

• So that access to the tap in the kitchen is not limited by the use of

the dishwasher, we recommend installing an additional tap, or fitting

a T-branch to the existing tap.

Consult your installer if the water

pressure is less than 0,5 bar.

If the water pressure is greater than 8

bar, a pressure reduction valve must be

used (available from your dealer).