2N Lift8 Breve manual - Página 4
Navegue en línea o descargue pdf Breve manual para Sistema de interfono 2N Lift8. 2N Lift8 13 páginas. Io module
También para 2N Lift8: Breve manual (8 páginas), Breve manual (12 páginas), Breve manual (14 páginas), Breve manual (6 páginas), Breve manual (12 páginas), Breve manual (17 páginas)
Imprimir página
Description
Typically, this audio unit is installed on lift shaft bottoms, cabin floors and roofs and/or any other
places that require communication, e.g. for lift maintenance purposes. The audio unit features an
orange robust aluminium case and is thus highly resistant against small falling objects, dripping oil
and other hardships that might occur in lift shafts. This unit is designed for outdoor applications too.
Press the ALARM button to establish connection with the control centre. The audio unit is equipped
with an integrated microphone and speaker and, thanks to its dimensions and strength, provides a
good and strong sound.
Caution - diods
Alarm call
The button is blue-backlit to indicate alarm call setup.
The button blue backlight flashes to indicate image download from a camera module.
Upgrade
The audio unit is initialised first - the ALARM button is blue-backlit.
The ALARM button blue backlight flashes to indicate an upgrading process.
The audio unit stops shining after upgrade and is ready for use.
Operation Staff
1.
This audio unit type is operated by well-trained persons (lift maintenance staff, e.g.).
2.
Use the ALARM button whenever a person falls into the shaft, for example.
3.
The audio unit dials the numbers stored in the ALARM button memory – set 2 (021–026).
Caution
If set 2 (021/026) is not stored in the ALARM memory, the audio unit dials set 1
(011–016) stored in the ALARM memory.
Use the ALARM button to call the control centre or machine room audio unit configured
as an intercom.
The ALARM button is not illuminated at relax.
Before You Start
Product Completeness Check
Check the product package for completeness before installation:
1 2N® Lift8 Shaft Antivandal
1 Torx 10 / Torx 20 double-ended spanner
Bushings (extra package): 1
template
1 big two-hole, sealed bushing with nut
1 replaceable big one-hole bushing seal for thick cables
1 big blank module with nut
1 small bushing with nut
1 big bushing packing
2 small bushing packings
1 bus connector
4 screws (5 × 90 mm)
4 "intelligent" mounting wall plugs (8 × 50 mm)
2N® Lift8 Shaft Antivandal
brief manual1 mounting
4