Brother P-TOUCH CUBE Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Etiquetadora Brother P-TOUCH CUBE. Brother P-TOUCH CUBE 18 páginas. Tze tape
También para Brother P-TOUCH CUBE: Manual del usuario (25 páginas), Manual del usuario (18 páginas), Manual del usuario (18 páginas), Manual del usuario (18 páginas)

Imprimir página
Brother P-TOUCH CUBE Manual del usuario
6. Pairing the Label Printer with Your Smartphone or Tablet
On your smartphone or tablet:
1. In Settings, access the Bluetooth option, and turn it ON.
2. When the list of discovered Bluetooth devices appears, tap PT-P300BT**** (where ****
is the last four digits of your label printer's serial number. Alternatively, you can find your
machine number on the sticker below the Power Button). The unit's serial number is
located where the TZe Tape Cassette is set inside the Cassette Cover.
3.If asked to enter a PIN Code, enter "0000".
NOTE
• Pairing instructions may differ slightly, depending on the smartphone or tablet you are
using.
• If the label printer is not discovered by your smartphone or tablet, the label printer may
already be connected to another device. If so, locate the smartphone or tablet that is paired
with the label printer, turn off Bluetooth on that device, and then power off the label printer
and power it back on.
• If the label printer is moved too far from your smartphone or tablet, it may disconnect. If this
happens, repeat these steps near the label printer to pair them again.
• If using a Smart Cover on your tablet, ensure that the cover remains open while you are
creating or printing labels. Closing the Smart Cover may interrupt data communication, and
your labels will not print.

7. Troubleshooting

Problem
I cannot turn on the label
printer.
A horizontal space runs
through the middle of the
printed label.
Check to see that the batteries are installed correctly, or that
the AC Adapter is securely connected.
Streaks or poor quality characters on printed labels generally
indicate that the Print Head is dirty. See the section
"Performing Routine Maintenance" for instructions on
cleaning the Print Head.
* Do not touch the Print Head with your bare hands.
Solution